FRONTIERE (FRANCE, 21 июня 2013)

Hello,

We sell sampling probes for the oil and gas sector.
Our products are out of the scope of the directive ATEX/94/9EC but are installed on oil & gas facilities and are under pressure.
We have a GOST-R certificate (voluntary). Do we need the permit to use? A customer talked about the CCTR which replaces the RTN and the GOST.
Could you help me to clarify what is really needed?
Thank you
Fabienne

Dear Fabienne,

you're fully right. Since 15/02/2013 New Technical Regulations on Customs Union (CU TR) came into force. Conformity certificate of CU TR substitutes Rostechnadzor permit to use. For more clarification please send us specification/technical informaton of your product, HS (customs) code. Basing on this data we can provide you details on necessity of obtaining any certificate and details of procedure.

Best regards,

Robin de Bondt (Rotterdam, Netherlands, 11 сентября 2013)

Dear Mr./Mrs.,

I am looking for an official copy of our certificate:

Plant-Holland certificate for Tronox CR826 Номер свидетельства и дата — RU.77.99.21.008.Е.011911.04.11 от 26.04.2011 Федеральная Служба Типографский номер бланка — 73239 Продукция — диоксид титана Tronox CR 826 Изготовлена в соответствии с документами — паспорт безопасности Изготовитель (производитель) — "Tronox Pigments (Holland) B.V.", Prof. Gerbrandyweg 2, 3197 КК Botlek-Rotterdam, The Netherlands (Нидерланды) Получатель — "Tronox Pigments (Holland) B.V.", Prof. Gerbrandyweg 2, 3197 КК Botlek-Rotterdam, The Netherlands (Нидерланды)

But I cannot find the right website or office to request this copy. Can you help me find the correct website or can you provide this service for us and send us an official copy of the certificate (state registration)?

Please let me know what you can do and what the cost are.

Many thanks for your help,


Robin de Bondt
Technical Service Manager Coatings EMEA
Tronox Pigments (Holland) B.V.

Dear Robin,

Federal service on customers' rights protection and human well-being surveillance (ROSPOTREBNADZOR http://rospotrebnadzor.ru/en/web/en/) is given the State Registration Certificate. Only the Federal Service can make an official copy.
We will ask information about obtaining copies and inform you. But there is the original Registration Certificate? Do you have it and want official copies in addition? Or did you lose original?

Bozhena (Minsk, 19 ноября 2013)

How can a foreign company obtain a CU Conformity certificate for serial production?

Hello Bozhena,

For obtaining CU Conformity Certificate you should prepare the list of documents which is required by certain Customs Union Technical Regulations. The applicant for the CU certification is the company located on the territory of Customs Union. As usual it is a representative office of a manufacturer in Russia/Belarus/Kazakhstan. Then it will be agreed regarding audit control visit and organization of the testing products. After all procedures you get Certificate.

If you have additional questions send us more information about your product and we will answer your questions.
Best regards,

John Gerrard (Saint-Petersburg, 3 февраля 2014)

Dear Sirs,

I am a bit confused about if I am asking the same company about certification issues.
Are you the same as www.rostest.com and rostest.ru ?
I look forward to your reply
Thank you

Dear John,
you may apply us for certification issues. We'll be glad to assist you in obtaining certificates, declarations in GOST R, TR, CU TR systems, Fire Safety Certificates and others. Also www.rostest.com is our web site.

Takis Spiliopoulos (Athens, 27 мая 2014)

I want to ask you, if there is a way not to need certification to export to Russia. My question is if possible for a product, when the quantity to be imported in Russia is less than five thousand pieces per year, not to need certification? My product is packaging for herb drinks, such as tea, chamomile and peppermint.
Thank you in advance

Dear Takis,
It does not depend on quantity, if you want to export something to Russia, conformity documents are required. In this case, the declaration of conformity according to CU TR 005/2011 “On safety of packaging” is required. Declaration is issued for declarant from Customs Union (Russia, Belarus, Kazakhstan) for 1-5 years, based on test protocol.

Hanna Wisniewska (Lubuskie, 17 июня 2016)

Dear Mr./Mrs.

We received from our Russian client letter as follows:
"Because of the entry into force the technical regulations of the Customs Union and the requirements of technical regulations of the Customs Union " About safety of machines and equipment " TR CU 010/2011, it’s necessary to confirm the verification of technical regulations and standards bodies to Federal Agency on Technical Regulating and Metrology.
Therefore we ask you in the period up to 10 June 2016 to provide certificates of conformity for supplied to Combine Plant Rostselmash, Ltd. production (according to the attached list) or conclusion (exemption letter) from “Russian research Institute of certification” that this product is not subject to technical regulations and obligatory certification."
We would like to deliver for them dieseltanks made from polyethylen in rotationalmoulding technology. Could you please inform as if this product subject to certification? If yes, what is the procedure and the costs?
Regards
Hanna Wisniewska

Yes, we can help you in certification of your product.

To determine exactly what certificate you need to get, send us the technical characteristics of the dieseltanks:
Are tanks the spare parts of tractors or cars?
Do tanks operate under high pressure? under what pressure?

Павел (Неизвестный, 10 февраля 2017)

Добрый день!
Интересует, делаете ли Вы подобную сертификацию для Европейских стран? Мы производим знаки пожарной безопасности на плёнке.

С уважением
Павел

Добрый день, Павел.
Да мы можем помочь Вам в оформлении европейских сертификатов.
Для просчета Вашего запроса необходимо описание продукции на английском языке.